Traditional gravity separation of oil and water is overburdened as modern fully synthetic oils in particular, which are increasingly used in compressors, tend to emulsify in condensate. The good news: The BOGE CC-2 accommodates this with all compressor oils and is approved worldwide.
Condensate forms in any compressor. As the condensate mixes with oil in oil-lubricated compressors, it has to be processed prior to removal. However, even with modern fully synthetic compressor oils, there is a failing in the gravity separation that has been used up to now for processing condensate. BOGE CC-2 oil-water separators therefore operate with different filter stages. The condensate is discharged from above via a pressure relief chamber and flows through the first polypropylene element. The next filter stage takes place in the second tower, before the charcoal filters out the final impurities – therefore residual oil content of < 10 ppm is achieved at the outlet and that applies to all compressor oils.
|Oil adsorption capacity
|CC 2-2||2||2||255 x 239 x 230||3|
|CC 4-2||4||4||392 x 368 x 210||8|
|CC 5-2||5||5||530 x 610 x 190||10|
|CC 10-2||10||10||650 x 750 x 240||17|
|CC 20-2||20||15||780 x 900 x 305||30|
|CC 30-2||30||25||970 x 900 x 380||43|
|CC 60-2||60||50||1160 x 1040 x 480||74|